HP Laserjet Pro M130fw Setup Support

  • HP Laserjet Pro M130FW Airprint Setup
  • HP Laserjet Pro M130FW Troubleshooting Guide
  • HP Laserjet Pro M130FW Software download
  • HP Laserjet Pro M130FW drivers
  • HP Laserjet Pro M130FW Wireless Setup
  • HP Laserjet Pro M130FW Driver Download
  • HP Laserjet Pro M130FW eprint
  • HP Laserjet Pro M130FW Manual

HP Laserjet Pro M130fw Setup



HP Laserjet Pro M130fw Setup Wireless Support

To connect the HP Laserjet Pro M130fw Setup over the wireless network,you can use different methods. Wireless Setup Wizard,Wi-Fi Protected Setup are some of the best methods to connect the printer over the wireless network . Follow the steps below for the connection process for Windows and Mac operating systems.

HP Laserjet Pro m130fw Wireless Setup for Windows

  • Note the network name and password to connect the printer over the wireless network. Switch on all the devices.
  • Make certain that the system is linked to the wireless network with an active internet connection.
  • To attain maximum signal strength during the setup process, position the system and computer close to each other.
  • In case the hp laserjet pro m130fw setup and system are connected to a different network, you may not able to connect to the wireless network.
  • Establish the printer and system connection over the same wireless network. In case the installer prompts,detach the USB cable.
  • In case you have previously used the USB connection, you need to alter the USB to wireless connection,remove the USB connection prior to proceeding
  • In Windows, look for the printer model number and choose the name of the printer from the list of available results.
  • Select the Utilities option and then choose the Printer Setup and Software Selection option.
  • Select the Convert a USB connected printer to wireless or Connect a new printer option in accordance with the version of the Windows operating system.
  • Make use of the instructions mentioned on the screen to accomplish the connection process.
  • In case you are connecting to the wireless network for the first time, make use of the HP Print and Scan Doctor tool to get the network name and password.
  • Choose the Connect through a wireless network option,in case urged. If urged,link the cable to the system.
  • It is necessary to print a configuration report to ensure that the printer has an SSID name in case the installation is accomplished.
  • Ensure that the ready light is on and stable on the printer’s control panel and that the printer is inactive.
  • Once the Configuration page is printed,detach the USB cable from the printer. Now,the printer is configured over the wireless connection.

HP Laserjet Pro m130fw Wireless Setup for Mac

  • Link the printer to the network using a WPS capable router.If the printer is not compatible with the WPS method,utilize wireless setup method.
  • Prior to installing the printer,note the network name.Trail the instructions mentioned on the screen to configure the wireless network.
  • Ensure that all the devices are powered up. Check whether the system and printer are linked to the same wireless network.
  • Terminate all the applications running on the system. Switch off the wireless setting,in case the Wireless light is stable.
  • On the hp laserjet pro m130fw setup’s control panel,press the Wireless button to turn off it. Use WPS ,one of the simplest methods to configure the printer over the network.
  • Press the WPS button on the wireless router. On the printer’s control panel , tap the wireless icon. Examine whether the wireless light begins to flicker.
  • Halt for few minutes for the printer to link to the network with the wireless router. Once the printer is linked,the wireless light is stable.
  • You need to generate a new print queue in the System Preferences icon on the Mac system to include the printer’s name.
  • In Mac,select Print & Fax,Print & Scan or Printers & Scanners in accordance with the version of the operating system.
  • Examine whether the name of the printer screens in the Printers list. Select the name of the printer by clicking the plus sign.
  • Select the Add Printer or Scanner option,choose the name of the printer and then move to the next step.
  • Select the Use or Print Using box,choose the name of the printer in the pop-up menu.
  • Now,include the printer’s name to the list by clicking the Add option. Select the Download option and then install it in the system to accomplish the installation process.
  • Terminate the System Preferences window. In case the printer is previously linked to the USB connection,alter the USB connection to wireless.
  • Once you have completed the connection process. Try to print,scan or fax based on the printer’s functionality.

Technical Support

Technical support


HP Laserjet Pro M130fw Setup – Wired Network Support

It is necessary to install the printer driver and software to configure the printer over the wired network connection. Prior to connecting the printer using an Ethernet cable,ensure that it is in working condition. Trail the steps below for the wired network setup for Windows and Mac operating systems.

Wired HP Laserjet Pro m130fw Setup for Windows

  • Step 1: nsure that you have a network router and an Ethernet cable which is in good working condition
  • Step 2: nsure that the system is linked to the router,switch or hub,in case it is not already linked to the system.
  • Step 3: ake use of an Ethernet cable .After obtaining the prerequisites ,power up the printer.
  • Step 4: nplug the protective cover from the Ethernet port on the hindside of the printer.
  • Step 5: ink one end of the Ethernet cable to the printer port and the other end to an available port on the network router.
  • Step 6: avigate to our website to key in the printer model and version of the operating system to download the driver.
  • Step 7: ased on the printer model and operating system version, the best driver for the printer is downloaded.
  • Step 8: rail the instructions mentioned on the screen to access the download file to begin the setup process.
  • Step 9: hoose the mode of connection as Wired Network. Once you have completed the setup process,try to print from the printer.
  • Step 10: In case the setup process is not successful,get directed to our website. Key in the printer model and operating system version.
  • Step 11: Select the Download option adjacent to the full feature driver. Take the aid of the on-screen instructions to accomplish the installation process.
  • Step 12: Once you process gets over,make an attempt to print,scan or copy from the printer based on its functionality.

Wired HP Laserjet Pro m130fw Setup for Mac

  • Step 1:Make certain that you have a network router or hub with available Ethernet ports. Ensure that the printer is linked to the router.
  • Step 2:In case the printer is not connected,link the printer to the Ethernet port.Acquire an Ethernet cable.
  • Step 3:Switch on all the devices. Eliminate the protective cover from the Ethernet port on the hindside of the printer.
  • Step 4:Plug in one end of the Ethernet cable to the printer port and the other end to the available port on the network router.
  • Step 5:In case the printer urges you to install the printer driver and software, get directed to our website to download the latest one.
  • Step 6:Key in the name of the printer and version of the operating system to download the appropriate driver .
  • Step 7:Make certain that the .dmg setup file is downloaded. To start the installation procedure,on the downloads folder, double-click the setup file.
  • Step 8:Make use of the instructions mentioned on the screen to accomplish the installation process.
  • Step 9:In case you are instructed to include the printer’s name in the print queue, select the name of the printer->Use or Print Using menu.
  • Step 10: Choose the name of the printer in the pop-up menu and then select the Add option.
  • Step 11: Once you have included the printer’s name in the print queue, revert to the HP Installer to accomplish the installation process.
  • Step 12: Once the installation process is accomplished,make an attempt to print,scan or copy from the printer.

Printing with Apple AirPrint

hp laserjet pro m130fw setup support – Download the AirPrint app from the App store.The AirPrint app is compatible with most of the Apple devices.Once you install the app in your mobile device,you will be able to print the documents or photos which just clicking the print option.You are not required to install any additional software to support the app. Make certain that the printer supports AirPrint. Switch on the printer and ensure that it is in the ready state.

  • Step 1 : Ensure that the printer is linked to the wireless network. Examine whether the printer and mobile device are linked to the same wireless network.
  • Step 2 : For certain printers,you need to update the firmware to activate the compatibility with the AirPrint app.
  • Step 3 : In case the multiple models of the printer are linked to the network,utilize the AirPrint’s name to choose the printer from the Apple device.
  • Step 4 : Ensure that the Apple devices have an active internet connection . Select the name of the printer’s name from the printers list.
  • Step 5 : On the Apple device,access settings->Wi-Fi networks->Choose a Network. Tap the network name.Now the printer is configured.
  • Step 6 : Select the Apple Menu->System Preferences.Select the Print and Scan. Select the plus sign to include the name of the printer.
  • Step 7 : Select the printer’s name under nearby printers.Select the Print Using or Use box . Choose the AirPrint option to include the printer’s name.
  • Step 8 : Now,the printer is ready to print using the AirPrint app.

DISCLAIMER

123hpcom.co is an independent technical support service provider for third-party products. The products, images, brands, and names of the third party providers displayed on the website are to furnish information. We do not claim any ownership, affiliation or endorsement of the third party products listed on our website.

Please wait...