•  ⟩ 
  • HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z UNBOXING SETUP

The HP Color LaserJet Enterprise Flow MFP M577Z printer performs the printing, scanning, copying, and faxing functions. Below are the steps to be followed to set up the printer.

  • The HP Color Laserjet Enterprise Flow MFP M577Z printer must be taken out of the box.
  • Check if the following necessary components are present inside the printer box.
  • Installation CD
  • Power cable
  • Phone cord
  • Manual
  • All the protective and packing materials should be removed from the HP Color Laserjet Enterprise Flow MFP M577Z printer.
  • Use the power cable to establish a connection between the HP printer and a wall outlet.
  • Power up the HP Color Laserjet Enterprise Flow MFP M577Z printer.
  • To use the HP printer for faxing, connect the phone cord between the printer and the phone jack.
  • If you need to connect the HP Color Laserjet Enterprise Flow MFP M577Z printer to a network, use an Ethernet cable.
  • Specify the following settings on the control panel of the HP printer.
  • Language
  • Date/time format
  • Time zone
  • Load enough plain paper into the HP printer’s paper tray.
  • To verify the printer functions, print a Configuration/Status page on the HP Color Laserjet Enterprise Flow MFP M577Z printer.

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z DRIVER DOWNLOAD

To download the HP Color Laserjet Enterprise Flow MFP M577Z printer driver, carry out any one of the methods given below.

Method 1

  • Click the Driver Download button available on this web page.

Method 2

  • Open a web browser on your computer, go to the HP’s official website, and click the Software and Downloads tab.
  • Navigate to the All Drivers section and click the Download button next to the Full Solution
  • This driver file will be downloaded and saved in the computer’s Downloads folder. Make sure to install the HP Color Laserjet Enterprise Flow MFP M577Z printer driver on your computer.
Hp Smart Tank Plus-551 Wireless All-In-One



HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z USB SETUP

  • At first, you have to finish the initial hardware setup of the HP Color Laserjet Enterprise Flow MFP M57Z printer.
  • For a few HP printers, the USB feature will be disabled.
  • To enable the USB feature, go to the control panel of the HP Color Laserjet Enterprise Flow MFP M577Z printer and select the General option.
  • Once you select the Enable Device USB option, the Enabled message will be displayed.
  • Do not connect a USB cable to your printer before installing the HP Color Laserjet Enterprise Flow MFP M577Z printer driver on your computer.
  • Once you visit the official HP website, search for the model name of the HP printer and go to the Software and Drivers tab.
  • Click the Choose a different OS link to mention the Operating System of the computer.
  • After you click the Download link next to the driver name, the HP Color Laserjet Enterprise Flow MFP M577Z printer driver will be saved in the Downloads folder.
  • Double-click the downloaded driver file to begin its installation process on the computer.
  • While installing the printer driver, select the USB connection type.
  • When prompted, connect the USB cable between the rear port of the HP Color Laserjet Enterprise MFP M577Z printer and the computer’s USB port.
  • Continue performing the guidelines shown on the screen to complete the printer driver installation on the computer.

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z WIRED SETUP

To perform a wired setup for the HP Color Laserjet Enterprise Flow MFP M577Z printer, refer to the instructions provided below.

  • Connect one end of an Ethernet cable the backside of the HP Color Laserjet Enterprise Flow MFP M577Z printer.
  • Plug the other end of the network (Ethernet) cable into your computer.
  • On the touch screen panel of the HP Color Laserjet Enterprise Flow MFP M577Z printer, tap the Network option from the Information menu.
  • If the network connection is established successfully, you will see the IP address on the printer’s control panel.
  • If the IP address is not displayed, repeat the previous step after a few minute
  • Download the HP Color Laserjet Enterprise Flow MFP M577Z printer driver from the manufacturer website.
  • Double-click the printer driver file and proceed with the on-screen steps to finish the installation process on the computer.

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z FAX SETUP

To perform the fax setup on the HP Color Laserjet Enterprise Flow MFP M577Z printer with the FutureSmart4 control panel, carry out the easy steps given below.

  • Go to the touch screen panel of the HP Color Laserjet Enterprise Flow MFP M577Z printer and then tap the following options.
  • Settings
  • Fax
  • Internal Fax Modem Setup
  • Mention your location and tap the Next option. Fill both the Company Name and Fax Number fields and touch the Next option.
  • Set the correct date and time and then tap Next.
  • Fill the Dialing Prefix field, review all the information, and tap the Finish option on the control panel of the HP Color Laserjet Enterprise MFP M577Z printer.
  • Also, configure the settings such as fax send settings, fax receive settings, and fax forwarding.

HP COLOR LASERJET ENTERPRISE FLOW MFP M577Z SCAN SETUP

Here are the instructions to set up Scan to Email on the HP Color Laserjet Enterprise Flow MFP M577Z printer.

  • To use the Scan to Email feature, both your computer and the HP Color Laserjet Enterprise Flow MFP M577Z printer must be connected to the same wired or wireless network.

Step 1

  • Enter the IP address of the HP printer in the address bar of a web browser. This will launch the Embedded Web Server page on the screen.
  • Click the Networking tab and select the TCP/IP Settings option on the left panel. You need username&password to access the Network Identification tab.
  • Check if the DNS suffix for your email client is listed and then click the Apply button followed by the OK button.
  • Once done with the network configuration settings, proceed further.

Step 2

  • On the Embedded Web Server page, click the Scan/Digital Send tab and select the ‘Email and Scan to Network Folder Quick Setup Wizards’
  • Click the Email Setup link and then click Use a server already in use by Email -> Next.
  • Fill the required fields in the Configure Email Settings dialog box.
  • Go to the Configure File Scan Settings section and set the scan settings such as file type, color, quality, file size, and resolution.
  • Once you review all the information, click the Finish button.